| Memory capacity: |
4, 8, 16, 32, 64, 128 and 256 Mbit for 1 (SPI), 4 (LPC/FWH), 8 and 16 bit memory devices (industry largest).
|
| Target access time: |
85ns (45ns and 25ns optional) access time (industry fastest). |
| Host transfer speed: |
1.6 to 4 MBit/Sec depending on used interface (industry highest). |
| Target access: |
Read and write PROMJet emulation memory by using the write signal or WBR function. |
| Host access:
|
Read and write emulation memory (on-the-fly using ICE option). |
| Host interface: |
Parallel printer port or TCP/IP Ethernet interface (optional). |
| Target interface: |
32 pin DIP or 50 pin HD connector. Other footprints are optionally supported. |
| Configuration: |
Jumperless via software to set emulation memory size and mode. |
| Daisy chaining: |
Support for wide buses or multi-bank targets. Each PROMJet is individually accessible. |
| Write support: |
Write input signal form the target processor to modify ROM memory contents. |
| Read-only support: |
Write-By-Reading allows target-host communication without target writes. |
| Multi-back support: |
Second CS input signal to support another memory device. |
| Data security: |
PROMJet generates and checks CRC. Shielded cable used for reliable operation. |
| Reset output: |
RESET and /RESET to reset the target system via software command. |
| Interrupt output: |
INT and /INT to support interrupt-driven ROM monitors for software debuggers. |
| Supported voltages: |
1.8 to 5.0 volt support are available by adding Variable-Voltage option. |
| Supply voltage: |
5V at 300mA from included external power supply or from target socket. |
| Target power sensing: |
Adjustable target power sense circuitry for safe, reliable emulation. |
| Upgradeable: |
PROMJet is upgradeable after purchase to support any size or configuration. |
| Memory trace: |
Available via an external trace module (optional). |
| Address trigger: |
PROMJet offers one Inst/Data trigger point. User can trigger on reads, writes or both. |
| Physical dimensions: |
1.7 x 0.7 x 2.3" (43 x 18 x 58 mm). Extension cables are optionally available. |
