Welcome to EmuTec Inc. Leader in JTAG Debugging, Programming, Testing and Flash Memory Emulation.

A  A  A

Welcome Guest, Login      

Products : PROMJet : Flash Emulator Order Information

PROMJet Order Information

This page contains PROMJet part numbers and ordering information. The user should start with a PROMJet device that matches or exceeds the size of the targeted Flash memory. The basic unit comes with support for 8-bit flash memory. Next, the user should choose the appropriate optional module for the desired functionality such as ICE, LPC or SPI support. If PROMJet is used with a target board that has the 50-pin header, it can be used directly with the board. Otherwise the appropriate adapter should be chosen to connect to the target board. Please consult with EmuTec or your local distributor for support and current pricing and availability.

PROMJet Base Devices
Part Number Description

PJ-4M-85

4 MBit PROMJet. (8Kx8 - 512Kx8).
Does not support OPT-BWS for 16bit.

PJ-8M-85

8 MBit PROMJet. (8Kx8 - 1Mx8) or
(8kx16 - 512Kx16). User selectable.

PJ-16M-85

16 MBit PROMJet. (8Kx8 - 2Mx8) or
(8kx16 - 1Mx16). User selectable.

PJ-32M -85

32MBit PROMJet. (8Kx8 - 4Mx8) or
(8kx16 - 2Mx16). User selectable.

PJ-64M-85

64MBit PROMJet. (8Kx8 - 8Mx8) or
(8kx16 - 4Mx16). User selectable.

PJ-128M-85

128 MBit PROMJet. (8Kx8 - 16Mx8) or
(8kx16 - 8Mx16) . User selectable.

PJ-256M-85

256 MBit PROMJet. (8Kx8 - 16Mx8) or
(8kx16 - 16Mx16). User selectable.

PROMJet Optional Modules
Part Number Description

OPT-25NS

Memory access speed upgrade from 85ns to 25ns.

OPT-45NS

Memory access speed upgrade from 85ns to 45ns.

OPT-BWS

Byte-Word-Switchable. Allows PROMJet to emulate 8bit and 16bit Flash memory.

OPT-ICE

Permit memory accesses On-The-Fly without target impact and includes WBR.

OPT-LPC

Adds support for LPC FLASH memory in addition to parallel Flash support.

OPT-SPI

Adds support for SPI FLASH memory in addition to parallel Flash support.

OPT-VV

Variable voltage support for low voltage FLASH memory (1.5 - 5Volt).

PROMJet Optional Adapters
Part Number Description

ADP-32PLCC

50-pin to 32-position PLCC adapter. For LPC support, specify ADP-32PLCC-LPC.

ADP-44PLCC

50-pin to 44-position PLCC adapter to support 16-bit Flash/EPROM memory.

ADP-44PS

44-pin PSOP adapters for 8/16 bit Flash memory. Since there is multiple FALSH pinouts, please specify the part number of the FLASH used.

ADP-xxSO

8-pin or 16-pin SOIC adapter. Supports SPI serial Flash pinout in 8 and 16-pin SOIC. Please specify the desired adapter when ordering.

ADP-HPLA

Interfaces PROMJet 50-pin header to HP Logic Analyzer (166x / 16xxx) cables.

ADP-LAN

Ethernet TCP/IP adapter with 2 PROMJet ports. It works with PROMJet Windows and Linux and ftp software.

ADP-xxDIP

50-pin to DIP adapter. It comes in 32-pin for 8-bit and 40/42-pin for 16-bit Flash memory support.

ADP-xxTS

TSOP Flash memory adapter. It comes in 40-pin for 8-bit and LPC FLASH support as well as in 48 and 56-pin for 8/16-bit support. Since there is multiple FALSH pinouts, please also specify the part number of the FLASH used.

CBL-2x32DIP

Adapts a 16-bit PROMJet to two 32-pin DIP 8-bit EPROM or FLASH memory pinout.

CBL-2x32PLCC

Adapts a 16-bit PROMJet to two 32-pin PLCC 8-bit EPROM or FLASH

CBL-50FLEX

50-pin PROMJet FLEX 6" (15cm) extension cable.